See3CAM_130E is an UVC-compliant AR1335 CMOS sensor based 13MP autofocus USB camera with iHDR support. It supports 4K Ultra HD (3840x2160) at 30fps over USB3.2 Gen1 in compressed MJPEG format. This See3CAM_130E can also stream Full HD (1920x1080) at 60fps and HD (1280x720) at 60fps in both uncompressed and compressed MJPEG formats. This camera can achieve up to 816fps for custom Region of Interest (ROI) resolutions. This high resolution camera is also backward compatible with USB 2.0, although in USB 2.0, this camera supports fewer resolutions at lower frame rates.

This 13MP autofocus USB camera has a dedicated, high-performance Image Signal Processor chip (ISP) that performs all the Auto functions (Auto White Balance, Auto Exposure control) in addition to complete image signal processing pipeline that provides best-in-class images and video and the MJPEG compression.

Key features:

Frame Rate

Full HD @ 60 fps , 4K @ 30 fps & VGA @ 120fps

Up to 816 fps for Custom ROI *

Output format: Uncompressed UYVY and Compressed MJPEG

Supported OS: Windows, Linux

iHDR support

10 pin GPIO header

External Hardware Trigger input for 3d sync and External trigger 13MP still capture with Zero-lag-shutter

Unique ID for each camera

Unique ID for each camera

Lightweight, versatile, and portable two-board solution

Interface:

Interface: USB 3.2 Gen 1 device

Connector: Type-C reversible interface connector

UVC Compliant - no additional drivers required

Backward compatible with USB 2.0 hosts

Module Features:

Sensor: AR1335 CMOS from onsemi®

Focus Type: Auto focus

Sensor Resolution: 13MP

Chroma: Color

Shutter Type: Electronic Rolling Shutter with global reset mode ^#

Optical Format: 1/3.2"

Output Format: Uncompressed UYVY and Compressed MJPEG

Focus Distance: 100mm to Infinity

Pixel Size: 1.1 μm x 1.1 μm

Sensor Active Area: 4208(H) x 3120(V)

Array Size: 4208(H) x 3120(V)

Responsivity: 4700 e-/lux-sec

SNR: 37 dB

Dynamic Range: Max upto 69 dB

FOV: 71.69° (D), 61.08° (H), 46.29° (V) (with the lens provided by e-con)

Electrical and Mechanical:

Operating Voltage: 5V +/- 5%

Operating Temperature Range: -30°C to 70°C

Power Requirements

Max: 2.005W

Min: 1.170W

Size in mm (l x b x h):

Without Lens: 80 x 15 x 9.67 mm

Board Weight:

7 Grams

Miscellaneous

Compliance: FCC, RoHS

Launched on:

Not supported by default. Requires firmware customization for higher framerates with custom ROI resolutions.

Customers interested to work on Android would require e-con SDK (Webeecam). The specs mentioned above shall not be the same for Android

Rolling shutter is supported in the default firmware. Customized firmware/hardware is required to use a rolling shutter with Global reset mode.